CUET-UG SERIES Engineering-graphics
Cotter Joints For Round Rods
6 previous year questions.
Volume: 6 Ques
Yield: Medium
High-Yield Trend
6
2023 Chapter Questions 6 MCQs
01
PYQ 2023
medium
engineering-graphics ID: cuet-ug-
Identify the correct statements for Sleeve and Cotter Joint.
A) This joint is used to connect two round rods.
B) In this joint gib is used with cotter.
C) This joint is used to join two rectangular rods.
D) Cotters are inserted in sleeve at right angle to axes of rods.
E) Taper of cotter is usually 1:40.
A) This joint is used to connect two round rods.
B) In this joint gib is used with cotter.
C) This joint is used to join two rectangular rods.
D) Cotters are inserted in sleeve at right angle to axes of rods.
E) Taper of cotter is usually 1:40.
Choose the correct answer from the options given below:
1
A and D only
2
B and E only
3
C and D only
4
B and C only
02
PYQ 2023
medium
engineering-graphics ID: cuet-ug-
Sleeve and cotter joint is useful for _______ of axial loads.
1
Light transmission
2
Heavy transmission
3
No transmission
4
Medium transmission
03
PYQ 2023
medium
engineering-graphics ID: cuet-ug-
In a cotter joint, the tapering on one side of cotter ________.
1
does not help in insertion into position and its withdrawal
2
does not help in the lateral adjustment of the connected parts
3
helps in insertion into position and its withdrawal
4
does not help in locking two rods together
04
PYQ 2023
medium
engineering-graphics ID: cuet-ug-
Identify the correct statement for a Gin and Cotter joint:
A. The Gib has the same thickness as that of the cotter.
C. Two cotters are used in this joint.
D. Cotter is made of plastic.
E. Rods are of circular shape in this joint.
Choose the correct answer from the options given below:
A. The Gib has the same thickness as that of the cotter.
C. Two cotters are used in this joint.
D. Cotter is made of plastic.
E. Rods are of circular shape in this joint.
Choose the correct answer from the options given below:
1
A and B only
2
A and C only
3
A and D only
4
D and E only
05
PYQ 2023
medium
engineering-graphics ID: cuet-ug-
In a sleeve and cotter joint, each rod has____ rectangular hole(s) for the insertion of cotter at right angle to the axis
1
one
2
Two
3
Three
4
five
06
PYQ 2023
medium
engineering-graphics ID: cuet-ug-
A machine part which prevents slacking of the joint besides holding the jaws of the strap from opening wide when the cotter is inserted
1
cotter
2
Rod
3
Gib
4
sleeve